SLEO® HPMC polymer products are used primarily in various construction materials like tile adhesives, cement mortar, cement renders, joint fillers, cement based plasters, self-leveling flooring compounds,external thermal insulation composite system (ETICS),external insulation and finish systems (EIFS) where it is used as a rheology modifier, thickener, binder, film former and water retention agent.
Technical Data
| Model No. | SL-HP100K-HP200K | SL-HP100T-HP200T |
| Appearance | slightly off-white to beige powder | slightly off-white to beige powder |
| Particle size (mesh) | 80 | 80 |
| Methoxy content (%) | 28.0-32.0 | 27.0-30.0 |
| Hydroxypropyl content (%) | 7.0-12.0 | 4.0-7.5 |
| Gelation temp. (℃) | 60.0-65.0 | 55.0-65.0 |
| Water retention rate (%) | ≥95% | ≥85% |
| Ash content (%) | ≤5.0 | 10.0~15.0 |
| Weight loss on drying (%) | ≤5.0 | ≤6.0 |
| pH value | 6.0-7.0 | 6.0-7.0 |
| Viscosity | 100000; 150000; 200000 | 100000; 150000; 200000 |
| (NDJ, 2% solution, mPa•s) | ||
| Viscosity | 35000; 45000; 55000; 65000 | 35000; 45000; 55000; 65000 |
| (Brookfield, 2% solution, mPa•s) | ||
| Applications | ||
| cement based renders; gypsum based mortar; masonry mortar; plastering mortar; interior and exterior wall putty; tile adhesives; exterior insulation finish system (EIFS); joint fillers; self-leveling flooring compounds; | exterior insulation finish system (EIFS); cement based plasters; self-leveling flooring compounds; masonry mortar etc. |
| Model No. | SL-HP100M-HP200M |
| Appearance | slightly off-white to beige powder |
| Particle size (mesh) | 80 |
| Methoxy content (%) | 27.1-30.0 |
| Hydroxypropyl content (%) | 4.0-10.0 |
| Gelation temp. (℃) | 55.0-65.0 |
| Water retention rate (%) | ≥85% |
| Ash content (%) | 18.0~20.0 |
| Weight loss on drying (%) | ≤5.0 |
| pH value | 6.0-7.0 |
| Viscosity | 100000; 150000; 200000 |
| (NDJ, 2% solution, mPa•s) | |
| Viscosity | 35000; 45000; 55000; 65000 |
| (Brookfield, 2% solution, mPa•s) |
Packaging
SLEO® HPMC are available in 25 KG paper plastic composite bags.
Storage
SLEO® HPMC should be stored in its original packaging in a cool dry place with temperature below 30℃
Validity
It is recommended to use SLEO® HPMC within 2 years. If not caked under prolonged storage, they can still be usable.
Notes
The unused HPMC have to be sealed to avoid moisture in contact with air.
very good